Endoscopes for Structural Surveying
Econoscope
A low-cost rigid endoscope kit with conventional lamp tip-illumination. Econoscope uses the same high-quality optical components as the Cavitymaster endoscope, but has a miniature quartz-halogen lamp built into the tip. Can be operated from rechargeable battery pack or its charger unit or optional vehicle power adapter.
Industrial endoscopes or borescopes allow detailed internal visual inspection of building structures through small access holes without costly disruption and re-instatement.
All kinds of structure can be inspected in this way, including cavity-walls, under-floor and between-floor voids, ceiling and roof spaces, air-conditioning and heating service ducts.
An access hole of 1/2″ (12-13 mm) diameter is required, this being normally drilled in the mortar joint of brickwork and masonry or directly through the floor material if viewing beneath a floor. Making-good after the inspection is simply accomplished by application or mortar or plaster or a suitable plug in the case of a floor.
From our large range of industrial borescopes Henke-Sass Wolf offer two standard kits for building and structural survey purposes. Both are configured for portability and simplicity of use as well as the highest possible level of optical performance and durability.
