|
In This Issue:
1. Cover – Permanent Magnet set PM50 2. News – From the Sales Desk – = Karl Deutsch 3815.501 UV Lamp = Parker DA200S Super Lift Magnetic Yoke 3. Special – 40% OFF PM-100 Permanents Magnet Sets
4. We are Open for Business by Phone and Online
Magnetic Yoke Set PM-50 – where AC field testing is not possible. PM50 allows access even in the most restricted applications. PM50 Magnet Sets are Super Strong and exceed the AS1171 18kg Lift Test. Flexible cable allows manageability whilst still meeting compliance. PM-50 Contacts are covered to reduce damage to the super strong surface. PM50A (50mm) & PM100 (100mm) – Crack Detector – Permanent Magnets.
Super Strong Neodymium rare earth Magnets Like more Information – 02 8850 3755
Benefits of the LED technology compared to glow-discharge lamps
• LED technology enables a service life of more than 10,000 hours • Increased operational reliability, no high-voltage ignition electronics • No filter glasses are required • No UV-B and UV-C radiation • Small and compact design • UV lamp, plugs and cables fulfil IP 65 • Still Made in Germany 4 high-end UV LEDs and 1 white light LED, • immediately ready to use, • High UV intensity @ 60 W/m² (6,000 μW/cm²) approx. at a distance of 400 mm, White light intensity: 1,600 lx approx. at a distance of 400 mm, 120 mm Ø illuminated UV area (at a distance of 400 mm), Very uniform intensity distribution, UV-A radiation at 365 nm wavelength
The DA-200S Parkers Most Powerful magnetic field Yoke available, for Critical asset testing, Widely used within the aircraft sector, CONSTANT AC OR HALF WAVE RECTIFIED DC FIELDS, Flip Switch activated AC or DC operation, Fully serviceable sturdy construction In Stock.
Leg Span 0 – 457 mm, Weight 5.44 kg, Cord Length 3m, Duty Cycle 50% 230VAC – 50/60 Hz @ 4 Amps Like more Information – 02 8850 3755
Who ever thought in 2020 Hand Sanitiser would become a most wanted item and standing close to someone would be frowned upon?
Like all business KK&S Instruments is working through this unusual time caused by COVID-19. We continue to work from our office and support our customers’ with all their requirements. Our Sales and Service teams are at the ready and Manufacturers are still working and continue to supply product.
Of course now contact is best through our website www.kks.com.au or by phone 02 88503755 to get immediate support.
KK&S continues to work and together we will get through this difficult event.
Have any questions or like further details?; Ph 02 88503755 or Email
|
The Best in Quality Service and Products for Non destructive testing
KK & S INSTRUMENTS
The Best in Quality Service and Products for Non destructive testing
